PEM® - Self clinching fasteners
PEMSERTER®
Insertion machines
PEMSERTER® 3000
PEMSERTER® 3000MB™
PEMSERTER® 2000
PEMSERTER® 4 AF
PEMSERTER® 4
IN-DIE
PEMSERTER® presses for installing PEM® fasteners.
PEM®
Self-clinching nuts for sheet metal
Types S, SS, H (carbon steel)
Types CLS, CLSS (stainless steel)
High push-out and torque-out resistance. Available in different shank lengths.
PEM®
Self-clinching nuts for stainless steel and other sheet metals
Type SP (precipitation grade stainless steel)
High push-out and torque-out resistance. Available in different shank lengths.
PEM®
Self-clinching nuts for flush installation
Type F (stainless steel)
Flush self-clinching nuts are especially suitable for aluminium. No protrusions on either surface after installation in round holes. The hexagonal head ensures high torsional strength. Available in different shank lengths.
PEM®
Miniature self-clinching nuts for sheet metal
Type SMPS (stainless steel)
Type SMPP (steel A286)
For thin sheets and small edge distances.
PEM®
Blind self-clinching nuts
Type B (carbon steel)
Type BS (stainless steel)
Blind thread ends prevent ingression of dirt, spray water, etc.
PEM®
Floating self-clinching nuts
Type AS (carbon steel)
Type AC (stainless steel)
The internal floating nut permits up to 0.8 mm adjustment for mating hole misalignment.
PEM®
Self-locking floating nuts
Type LAS (carbon steel)
Type LAC (stainless steel)
The self-locking floating nut permits up to 0.8 mm adjustment for mating hole misalignment.
PEM®
Self-locking nuts
Type PL (carbon steel)
Type PLC (stainless steel)
Self-locking nuts with a polyamide retaining ring. Retaining effect is ensured even after loosening the screw repeatedly.
PEM®
Self-clinching nuts
Types FE, FEO, FEX, FEOX, U, UL (stainless steel)
Miniature nuts, optionally with a locking effect.
PEM®
Self-locking nuts
Type CFN (carbon steel)
Self-locking nut. Smallest design for the narrowest edge distances. Locking effect ensured even after repeated loosening.
PEM®
Self-locking nuts
Type SL (carbon steel)
Self-locking nuts with a notch in the head.
PEM®
Weld nuts
Type WN (copper-plated steel)
Type WNS (stainless steel)
Round design with a positioning shank and three projection welds.
PEM®
Round rivet bushes
Type RHB (carbon steel)
Torque-resistant and capable of loads applied from both sides.
PEM®
Mini rivet bushes
Type RMHB (carbon steel)
Torque-resistant and capable of loads applied from both sides.
PEM®
Self-clinching flush head studs
Type FH (carbon steel)
Type FHS (stainless steel)
Type FHA (aluminium)
Flush head studs not requiring additional deburring or welding. Available in different lengths.
PEM®
Self-clinching flush head studs
Type FH4 stainless steel AISI 400
Typ FHP stainless steel A 286
Flush head studs for through-holes not requiring additional deburring or welding. Available in different lengths. Specially suitable for VA sheets and other sheet metals.
PEM®
Self-clinching flush head low displacement studs
Type FHL (carbon steel)
Type FHLS (stainless steel)
Flush head low displacement studs with a reduced head diameter for use in case of small edge distances (e.g. laminated keyboards). Available in different lengths.
PEM®
Self-clinching flush head pins
Type FH (carbon steel)
Type FHS (stainless steel)
Flush head pins for through-holes not requiring additional deburring or welding . Available in different lengths.
PEM®
Self-clinching pilot pins
Type TPS (stainless steel)
Flush mounted pilot pins for through-holes not requiring additional deburring or welding. Available in different lengths.
PEM®
Miniatur-Einpressbolzen
Typ MPP (rostbeständiger Stahl)
Miniatur-Einpressbolzen ohne Gewinde für metallische Werkstoffe.
PEM®
Self-clinching high-strength studs
Type HFH (carbon steel)
Type HFHS (stainless steel)
M5-M10 HFH high-strength studs for extremely high pull-through and torque-out applications. Head protrudes 1, 1-2, 3 mm after installation. Available in different lengths.
PEM®
Self-clinching dog-point studs
Type HFHD (carbon steel)
Type HFHDS (stainless steel)
Self-clinching studs with a dog point for automatic installation. Used in automobiles for example.
PEM®
Self-clinching studs for sheet metal
Type HFE (through-hardened carbon steel)
For higher pull-through applications.
PEM®
Self-clinching dog-point studs for sheet metal
Type HFED (through-hardened carbon steel)
For higher pull-through applications.
PEM®
Self-clinching flush head stud for sheet metal
Type YQE (carbon steel)
X-PressTM threads enable quick mating of plastic nuts and clips.
PEM®
Concealed-head self-clinching studs
Types CHA, CFHA (aluminium)
Types CHC, CFHC (stainless steel)
For cylindrical blind holes. Specially for aluminium front panels when non-visible mounting is required. Available in different lengths.
PEM®
Concealed-head self-clinching standoffs
Types CSS, CSOS (stainless steel)
For cylindrical blind holes. Specially for aluminium front panels when non-visible mounting is required. Available in different lengths.
PEM®
Self-clinching screwlock standoffs
Type DSOS (stainless steel )
Specially for D-sub connector applications.
PEM®
Self-clinching standoffs
Type SO (carbon steel)
Type SOS (stainless steel)
Self-clinching flush-head standoffs with through-holes for installation in circular holes. Hexagonal head provides torsion protection. Available in different lengths.
PEM®
Self-clinching standoffs for stainless steel and other sheet metals
Type SO4 (400 stainless steel)
Self-clinching flush-head standoffs for installation in circular holes. Hexagonal head provides torsion protection. Available in different lengths. Specially suitable for VA sheets and other sheet metals.
PEM®
Miniatur-Einpressgewindebuchsen offen
Typ MSO4 (rostbeständiger Stahl)
Miniatur-Einpressgewindebuchsen für Edelstahl und metallische Werkstoffe.
PEM®
Blind self-clinching standoffs
Type BSO (carbon steel)
Type BSOS (stainless steel)
With blind threads for tight sealing. Available in different lengths.
PEM®
Blind self-clinching standoffs for stainless steel and other sheet metals
Type BSO4 (400 stainless steel)
With blind threads for tight sealing. Available in different lengths. Specially suitable for VA sheets and other sheet metals.
PEM®
Self-clinching panel fasteners
Type PFC2 (stainless steel)
Spring-loaded captive screw.
PEM®
Self-clinching panel fasteners
Type PF11 (nickel-plated steel)
Spring-loaded captive screw.
PEM®
Self-clinching panel fasteners
Type PFHV (nickel-plated steel)
Non spring-loaded captive screw.
PEM®
Undetachable clinch screws for sheet metal
Types SCBJ, SCB (carbon steel)
Undetachable, no additional mounting part necessary.
PEM®
Snap-top standoffs
Type SSA (aluminium)
Type SSC (stainless steel)
Type SSS (carbon steel)
Self-clinching standoffs for sheet metal.
Available in different lengths.
PEM®
Keyhole standoffs
Type SKC (stainless steel)
Keyhole standoffs for metallic materials. For quick fixing or loosening of covers, sheets, etc. Available in different lengths.
PEM®
Self-clinching electroconductive pins for sheet metal
Type Radsok® (Carbon steel, silverplated)
Mating Pin for the Radsok® terminal.
Type KVT-6,3-14
Flush head type with plug geometry according to DIN standard.
PEM®
Cable tie-mount hardware
Type TD (sintered steel)
Self-clinching cable-tie for metallic materials.
PEM®
Right angle clinch fasteners
Type RAA (aluminium)
Self-clinching right angle attachment points for metallic materials.
PEM®
Right angle clinch fasteners
Type RAS (sintered steel)
Self-clinching right angle attachment points for metallic materials.
PEM®
SpotFast® self-clinching fasteners
Type SF (carbon steel)
Type SFP (stainless steel)
For flush connection of two metal sheets.
PEM®
TackPin™ self-clinching fasteners
Type TA (aluminium)
For flush connection of two metal sheets.
PEM®
Snap-top standoffs
Type KSSB (brass)
Self-clinching standoffs for plastics or printed circuit boards. Available in different lengths.
PEM®
Broaching studs for plastics
Type KFH (phosphor bronze)
Self-clinching broaching studs made of phosphor bronze specially suitable for printed circuit boards and plastic. Tin-plated for good solderability. Available in different lengths.
PEM®
Broaching nuts for printed circuit boards
Type KF2 (carbon steel), taped version available
Type KFS2 (stainless steel)
Self-clinching broaching nuts for printed circuit boards (printed circuits) and other plastics. Good torsion protection thanks to the distinct knurl.
PEM®
Broaching standoffs for plastics
Type KFE (carbon steel), taped version available
Type KFSE (stainless steel)
Self-clinching broaching standoffs for spacing or stacking on printed circuit boards and other plastics. Available in different lengths and without threads.
PEM®
Taped SMT-compliant nuts for printed circuit boards
Type KF2 (carbon steel) conforming to RoHS
Self-clinching broaching nuts for printed circuit boards (printed circuits). Good torsion protection thanks to the distinct knurl.
PEM®
Taped SMT-compliant standoffs for printed circuit boards
Type SMTSO (carbon steel) conforming to RoHS
Self-clinching broaching standoffs for spacing or stacking on printed circuit boards. Available in different lengths.
PEM®
Taped SMT-compliant standoffs for printed circuit boards
Type KFE (carbon steel) conforming to RoHS
Self-clinching broaching standoffs for spacing or stacking on printed circuit boards. Available in different lengths.